  [ACTION   General@26-03-23 11:31:08] Please press the hardware reset button on the board to start the download process.
  [ACTION   General@26-03-23 11:31:16] Please press the hardware reset button on the board to start the download process.
  [INFO     Flash Code@26-03-23 11:31:31] Firmware File C:\Program Files\SmartSnippetsToolbox\SmartSnippetsToolbox5.0.28\common_resources\SupportPackages\DA1453x\toolbox_resources/common/flash_programmer_533.bin has been selected for downloading.
  [INFO     Flash Code@26-03-23 11:31:32] Connection to COM30 port has successfully opened.
  [INFO     Flash Code@26-03-23 11:31:32] Started download procedure...
  [ACTION   Flash Code@26-03-23 11:31:33] Please press the hardware reset button on the board to start the download process.
  [ERROR    Flash Code@26-03-23 11:31:39] Timeout: Reset signal not detected for more than 8000 msecs.
  [INFO     Flash Code@26-03-23 11:31:39] Please try again. If problem persists refer to User Manual AN-B-072 (AN-B-072: DA1453x Booting from OTP and Serial Interfaces) and check jumper settings. For booting from 2-wire UART  (P0_0 and P0_1) see Figure 10. For booting from 1-wire UART P0_5 see Figure 6.
  [INFO     Booter@26-03-23 11:31:39] Successfully disconnected from port COM30.
  [ERROR    Flash Code@26-03-23 11:31:39] Failed downloading firmware file to the board.
  [WARNING  OTP Image@26-03-23 11:34:24] 4 0xFF bytes added at the end of read data for padding.
  [ACTION   General@26-03-23 11:34:25] Please press the hardware reset button on the board to start the download process.
  [ACTION   General@26-03-23 11:34:33] Please press the hardware reset button on the board to start the download process.
  [INFO     Flash Code@26-03-23 11:34:58] Firmware File C:\Program Files\SmartSnippetsToolbox\SmartSnippetsToolbox5.0.28\common_resources\SupportPackages\DA1453x\toolbox_resources/common/flash_programmer_533.bin has been selected for downloading.
  [INFO     Flash Code@26-03-23 11:34:58] Connection to COM30 port has successfully opened.
  [INFO     Flash Code@26-03-23 11:34:58] Started download procedure...
  [ACTION   Flash Code@26-03-23 11:34:59] Please press the hardware reset button on the board to start the download process.
  [ERROR    Flash Code@26-03-23 11:35:06] Timeout: Reset signal not detected for more than 8000 msecs.
  [INFO     Flash Code@26-03-23 11:35:06] Please try again. If problem persists refer to User Manual AN-B-072 (AN-B-072: DA1453x Booting from OTP and Serial Interfaces) and check jumper settings. For booting from 2-wire UART  (P0_0 and P0_1) see Figure 10. For booting from 1-wire UART P0_5 see Figure 6.
  [INFO     Booter@26-03-23 11:35:06] Successfully disconnected from port COM30.
  [ERROR    Flash Code@26-03-23 11:35:06] Failed downloading firmware file to the board.
