Project

General

Profile

Actions
Copy link

Task #2807

open

Implement Configure command on board side - USB Tool

Task #2807: Implement Configure command on board side - USB Tool

Added by Sunder Venugopal 9 months ago. Updated 3 months ago.

Status:
Resolved
Priority:
Normal
Assignee:
Prakash M
Target version:
Future
Start date:
16/03/2026
Due date:
02/04/2026 (about 5 months late)
% Done:

90%

Estimated time:
80:00 h
Spent time:
57:00 h

Files

clipboard-202604052320-kq5qc.png (124 KB) clipboard-202604052320-kq5qc.png Prakash M, 06/04/2026 06:20 AM
clipboard-202604052320-kq5qc.png

Related issues 2 (0 open — 2 closed)

Follows VAS Product Release 2.0 - Task #2806: Implement Event Driven State MachineClosedMohan Kashyap12/12/202518/12/2025

Actions
Precedes VAS Product Release 2.0 - Task #2808: QA Sanity and Regression TestingClosedMohan Kashyap03/04/202610/04/2026

Actions

Updated by Sunder Venugopal 9 months ago Actions
Copy link
 #1

  • Follows Task #2806: Implement Event Driven State Machine added

Updated by Sunder Venugopal 9 months ago Actions
Copy link
 #2

  • Precedes Task #2808: QA Sanity and Regression Testing added

Updated by Sunder Venugopal 9 months ago Actions
Copy link
 #3

  • Due date changed from 22/12/2025 to 28/01/2026
  • Start date changed from 18/12/2025 to 26/01/2026

Updated by Sunder Venugopal 9 months ago Actions
Copy link
 #4

  • Due date changed from 28/01/2026 to 23/12/2025
  • Start date changed from 26/01/2026 to 19/12/2025

Updated by Mohan Kashyap 9 months ago Actions
Copy link
 #5

  • Status changed from New to Hold

On hold untill we finalise Message Formats

Updated by Mohan Kashyap 8 months ago Actions
Copy link
 #6

  • Status changed from Hold to In Progress

Updated by Mohan Kashyap 8 months ago Actions
Copy link
 #7

  • % Done changed from 0 to 50
  • Estimated time set to 24:00 h

Need to test the code

Updated by Mohan Kashyap 8 months ago Actions
Copy link
 #8

  • % Done changed from 50 to 80

If we enable the receive path in LWIP TCP, the Global Interrupts stop firing after some time.

Updated by Sunder Venugopal 7 months ago Actions
Copy link
 #9

  • Due date changed from 23/12/2025 to 02/03/2026

Config command should be run over USB.

Updated by Sunder Venugopal 6 months ago Actions
Copy link
 #10

  • % Done changed from 80 to 100

Updated by Mohan Kashyap 6 months ago Actions
Copy link
 #11

  • Subject changed from Implement Configure command on board side to Implement Configure command on board side - USB Tool
  • Due date changed from 02/03/2026 to 20/03/2026
  • Start date changed from 19/12/2025 to 16/03/2026
  • Estimated time changed from 24:00 h to 40:00 h

Implement the configure command over USB Tool

Updated by Mohan Kashyap 6 months ago Actions
Copy link
 #12

  • Due date changed from 20/03/2026 to 27/03/2026

Updated by Mohan Kashyap 6 months ago Actions
Copy link
 #13

  • Estimated time changed from 40:00 h to 80:00 h

Updated by Mohan Kashyap 6 months ago Actions
Copy link
 #14

  • % Done changed from 100 to 50

Updated by Thomas Joseph 6 months ago Actions
Copy link
 #15

  • Target version set to Future

Updated by Mohan Kashyap 5 months ago Actions
Copy link
 #16

  • Due date changed from 27/03/2026 to 02/04/2026
  • Assignee changed from Mohan Kashyap to Prakash M

Updated by Prakash M 5 months ago ยท Edited Actions
Copy link
 #17

clipboard-202604052320-kq5qc.png

Update: The VAS device has been connected with the USB TOOL software. for reference:

Pending Task:
'Update' sequence only needs to be verified with code.

Updated by Mohan Kashyap 5 months ago Actions
Copy link
 #18

  • % Done changed from 50 to 80

Implemented coding as per USB Tool.

The configuration parameters are updated from USB Tool

Need to apply the parameters and test

Updated by Prakash M 3 months ago Actions
Copy link
 #19

  • % Done changed from 80 to 90
Actions
Copy link

Also available in: PDF Atom