Task #3020
openTask #2911: PLC MODBUS mapping from Chola on Siemens PLC
Modbus mapping in Siemens PLC
100%
Description
thru the software, plc modbus mapping needs to be done.
This is done by Theja, Prakash to document the changes
we need modbus address, data type and parameter details
as per theja, PLC tool supports only real(float) data type.
even the bit informations have been combined into float.
Prakash to document the details.
VK Updated by Venu Krishnamurthy 2 months ago
- Assignee set to Prakash M
assigned to Prakash
TJ Updated by Thomas Joseph 2 months ago
- Subject changed from PLC modbus mapping to Modbus mapping in Seimens PLC
TJ Updated by Thomas Joseph 2 months ago
- Subject changed from Modbus mapping in Seimens PLC to Modbus mapping in Siemens PLC
@Prakash M : Please maintain a document with relevant details, upload in onedrive and share link
PM Updated by Prakash M about 2 months ago
- Status changed from New to In Progress
- % Done changed from 0 to 90
PLC modbus mapping is in process.
PM Updated by Prakash M about 2 months ago
- Status changed from In Progress to Resolved
- % Done changed from 90 to 100
The PLC Modbus holding registers and data types have been updated and shared in the OneDrive link below.
Next action plan once E-REMOS is updated:
1.Device configuration on UI.
2.Configure the PLC Modbus holding registers on the UI.
3.Config packet needs to be verify on device side if once 4G communication established with
server and device.
4,Verify the Modbus holding register values on the UI according to the specified data type ranges.
5.Documentation.
TJ Updated by Thomas Joseph about 2 months ago
Prakash M wrote in #note-5:
The PLC Modbus holding registers and data types have been updated and shared in the OneDrive link below.
Update doc. in project folder => https://elpisit-my.sharepoint.com/:f:/g/personal/satish_sl_elpisitsolutions_com/IgCIvoOu9bLkQopDdOPk_9nHAd6CVwjeFbcUqpRqBSN7wZ8?e=0vaZyR