Redmine

19/01/2026

VK 11:11 AM Chola Turbo Machinery Pvt Ltd Task #3054: USB Configuration Tool(Revision)

updated start/end dates Venu Krishnamurthy

VK 11:10 AM Chola Turbo Machinery Pvt Ltd Task #3054: USB Configuration Tool(Revision)

re assigned to Rajendra.
he has been briefed about the requirements
modbus ip address
TCP and RTU selection Venu Krishnamurthy

09/01/2026

VK 10:19 AM Gateway V2 Task #3055 (Analysis Started): USB stack integration

mplabx USB stack integration.
port the USB configuration code
make a E54 release 1.3 Venu Krishnamurthy

07/01/2026

VK 11:50 AM Chola Turbo Machinery Pvt Ltd Task #3021 (In Progress): E-REMOS device configuration & Dashboard setup

E-remos device creation and signals on modbus with address and data type creation
1. create a new device
2. Configure the device to list all signals based on the modbus
3. test and verify the config packet
4. Dashboard creation wit... Venu Krishnamurthy

VK 11:48 AM Chola Turbo Machinery Pvt Ltd Task #3020: Modbus mapping in Siemens PLC

assigned to Prakash Venu Krishnamurthy

VK 11:46 AM Chola Turbo Machinery Pvt Ltd Task #3020 (Resolved): Modbus mapping in Siemens PLC

thru the software, plc modbus mapping needs to be done.
This is done by Theja, Prakash to document the changes
we need modbus address, data type and parameter details
as per theja, PLC tool supports only real(float) data type.
even... Venu Krishnamurthy

06/01/2026

VK 02:29 AM mTracker(Mid Range GW)-Production Task #2927: N58 Module Procurement

assigned to Dhanashekar to board procurement Venu Krishnamurthy

VK 02:26 AM mTracker(Mid Range GW)-Production Task #2926: N58 Evaluation

use the proto board and integrate with E54 for AT command implementation.
we need data posting using TCP & MQTT over N58
N58 + TCP
N58 + MQTT Venu Krishnamurthy