Core4 » mDAQ4-1(Mid Range mDAQ)-Pilot

Refer => http://5.161.106.25:3000/issues/3156

Test setup prepared except GW2.0 PCB => http://5.161.106.25:3000/issues/2997#note-7

Also, Identify 100mA , 200mA, 500mA load also like solenoid, bulb, resistor
8-channel, compact with visual indication

1. Two bulbs with 12 V/5 W connected in series.(2-sets available)
2. Two bulbs with 12 V/6 W connected in series.(2-sets available)
   For 200mA,
3. setup 24V 300mA Current limited to 200 mA using an 120 ohm/5w resistor.
   For 100mA,
4. setup 470 ohm, 5 W resistor used.