Bug #3361
open
LED not functioning as per the requirements
90%
Description
Requirements -Status Indicators
- LED1 – Red (Power Status)
Device Power ON – ON
Device Power OFF – OFF
- LED2 – Orange (4G Status)
Data Posting to Server – Orange Blink
Network Failure / Socket Not Connected – OFF
Network OFF – Orange Blinking Continuously
- LED3 – Green (USB Status)
USB Connected to Tool – ON / Green Blink
Data Transfer – Green Blinking
Config Tool Disconnected – OFF
- LED4 – Blue (Modbus Status)
Modbus Data Reading – Blue Blink
LAN Cable Connected – ON
LAN Cable Disconnected – OFF
Socket Error – Blinking Continuously
During device booting, all LEDs will blink 5 times.
Updated by Sunder Venugopal about 2 months ago
- Status changed from New to In Progress
Updated by Jagatheswaran J about 2 months ago
- Subject changed from LED notfunctioning as per the requirements to LED not functioning as per the requirements
- % Done changed from 0 to 90
The issue has been fixed. It needs to be verified again after code integration.
Updated by Channamallikarjuna Mattihalli about 2 months ago
- Assignee changed from Channamallikarjuna Mattihalli to Greeshma Rayani
Updated by Jagatheswaran J about 2 months ago
Waiting for code integration. Once it is completed, testing will be performed and the results will be updated.
Updated by Sunder Venugopal about 2 months ago
- Due date set to 18/03/2026
Updated by Sunder Venugopal about 1 month ago
23/3: Still the code is not available
Updated by Greeshma Rayani about 1 month ago
code integration is done.There is a small change in usb led
- During data transfer led will blink 2 times.
- When error occurs in data transmission led will blink continuosly.
- i have updated the led functionality in document below is the onedrive link
https://elpisit-my.sharepoint.com/:x:/g/personal/satish_sl_elpisitsolutions_com/IQAenj5K50l3TpIS8yGYuoHeAbinfWxrZxCUZn4OPBDHkjU?e=njaAdB
Updated by Greeshma Rayani about 1 month ago
- Assignee changed from Greeshma Rayani to Jagatheswaran J