ELPIS Product Management

16/04/2026

10:01 AM Chola Turbo Task #3028 (Hold): USB Factory Configuration

Greeshma Rayani

30/03/2026

07:02 AM mDAQ4-1(Mid Range mDAQ)-Pilot Bug #3344: USB LED (Green) is not meeting the specified requirement

There is a small change in usb led
During data transfer led will blink 2 times.
When error occurs in data transmission led will blink continuosly.
i have updated the led functionality in document below is the onedrive link
https://... Greeshma Rayani

06:59 AM mTracker(Mid Range GW)-Pilot Bug #3360: USB Config Tool : when the protocol is changed from RTU to TCP in the Modbus Config section No response

After few changes in the usb tool a new version is relesed and given for testing,below is the onedrive link of new tool
https://elpisit-my.sharepoint.com/:u:/g/personal/satish_sl_elpisitsolutions_com/IQA8JGyhi4hISb1nxp67DtPjAVQkrT01-... Greeshma Rayani

06:57 AM Chola Turbo Bug #3351: USB Configuration Tool –Not working

After few changes in the usb tool a new version is relesed and given for testing below is the onedrive link of new tool
https://elpisit-my.sharepoint.com/:u:/g/personal/satish_sl_elpisitsolutions_com/IQA8JGyhi4hISb1nxp67DtPjAVQkrT01-... Greeshma Rayani

06:46 AM mTracker(Mid Range GW)-Pilot Bug #3361: LED not functioning as per the requirements

code integration is done.There is a small change in usb led
1. During data transfer led will blink 2 times.
2. When error occurs in data transmission led will blink continuosly.
3. i have updated the led functionality in document bel... Greeshma Rayani

24/03/2026

10:44 AM Chola Turbo Bug #3351: USB Configuration Tool –Not working

1. No response popup in the USB tool occurs when the ack is not sent or even if ack didn't reach to the tool as per the time intervals maintained in the tool so some time time period has been increased in the USB tool application. Even i... Greeshma Rayani

10:43 AM mDAQ4-1(Mid Range mDAQ)-Pilot Bug #3343: USB tool accessed after Login Opened ---> connectivity ---> Error Message observed. ---> App not working

1. Error message is due to latency after the ack sent from the device and application tool.
2. with few changes in the tool new usb tool application is released passed the tool for teting. Greeshma Rayani

10:42 AM mTracker(Mid Range GW)-Pilot Bug #3360: USB Config Tool : when the protocol is changed from RTU to TCP in the Modbus Config section No response

1. No response popup in the USB tool occurs when the ack is not sent or even if ack didn't reach to the tool as per the time intervals maintained in the tool so some time time period has been increased in the USB tool application. Even i... Greeshma Rayani

03/03/2026

12:20 PM Gateway V2 Task #3055: USB stack integration

After changing the VBUS pin USB pin detecting and read write is also working. USB code has been integrated in the E54 main application. Greeshma Rayani

12:13 PM mTracker(Mid Range GW)-Pilot Task #3031: Application Integration

-> AI/DI/DO modules are tested with the inputs, and it is working with 100khz SPI clock frequency.
-> DO should be handled through the E-Remos.
-> posting time parameter is added and testing in that the data is not updating in the to... Greeshma Rayani