ELPIS Product Management

23/02/2026

06:26 AM mDAQ4-1(Mid Range mDAQ)-Pilot Task #3257: Modbus RTU

Modbus RTU is working with multiple slave ID's. DEVI PRIYAA

06:24 AM mTracker(Mid Range GW)-Pilot Task #3030 (Resolved): AI Module

DEVI PRIYAA

17/02/2026

11:16 AM mTracker(Mid Range GW)-Pilot 6:00 hours (Task #3254 (Resolved): Modbus RTU)

Multiple slave id's is working DEVI PRIYAA

11:16 AM mTracker(Mid Range GW)-Pilot Task #3254 (Resolved): Modbus RTU

Using multiple slaveid's , the modbus RTU is working fine.
Test Setup:
mTracker device is connected to 3 different slave ID's. From three Slave ID's we are getting response. Even one slave is removed, the other slave are reading th... DEVI PRIYAA

13/02/2026

07:02 AM mDAQ4-1(Mid Range mDAQ)-Pilot Task #3033: AI Module

Sercom0 was configured for AI (SPI). Clock signal has not been generated.
Now the response from the ADC module. need to test with the inputs. DEVI PRIYAA

06:57 AM Chola Turbo Task #3243: ConfigPacket (Split, Delay)

As discussed with venu sir, the Sw release will contain the receiving the config packet in the synchronous mode.
If packet received timeout expires, it request again, no halt will happen because of that delay. This has been tested.
F... DEVI PRIYAA

06:53 AM mTracker(Mid Range GW)-Pilot Task #3254 (In Progress): Modbus RTU

Code Integration has been completed.
Multiple slave ID configuration has been enabled from E-remos and in Embedded Sw also.
DEVI PRIYAA

10/02/2026

07:59 AM mDAQ4-1(Mid Range mDAQ)-Pilot 2:00 hours (Task #3244 (In Progress): E-REMOS Configuration for mDAQ Functional Testing)

Configured the dashboard as per the requirement. DEVI PRIYAA

07:59 AM mDAQ4-1(Mid Range mDAQ)-Pilot Task #3244 (In Progress): E-REMOS Configuration for mDAQ Functional Testing

Configured the dashboard parameters for mDAQ.
12 - DI
3 - AI
6 - DO DEVI PRIYAA

09/02/2026

11:01 AM mTracker(Mid Range GW)-Pilot Task #3031: Application Integration

Re-assigned to @Greeshma for this task.
Due extended till 11th Feb. DEVI PRIYAA