Project

General

Profile

Actions
Copy link

Bug #3259

closed

Atmel ICE Debugger not detecting

Bug #3259: Atmel ICE Debugger not detecting

Added by Thomas Joseph 3 months ago. Updated about 2 months ago.

Status:
Closed
Priority:
Urgent
Assignee:
VenuMadhav S
Target version:
-
Start date:
14/02/2026
Due date:
14/02/2026
% Done:

100%

Estimated time:
Spent time:
7:30 h
Severity:
Critical

Description

Updated by Thomas Joseph 3 months ago Actions
Copy link
 #1

  • % Done changed from 0 to 30

RST issue
probed the reset signal, found no toggling.
re-soldered the rst cable at the gateway device

started working for erasing, flashing and debugging

Updated by Thomas Joseph 3 months ago Actions
Copy link
 #2

  • Status changed from Analysis Started to Resolved
  • % Done changed from 30 to 100

Two debuggers (s/n 611, 426) - not detecting in mplab

Power LED not glowing with USB plugged
Target activity LED (bicolour) flashing

checked the debugger cable
probed the circuit points in the debugger PCB

checked with Device manager. screen refreshing during USB cable plugging in/removal
checked with Wireshark - Activity noticed. same in all three debuggers
decided to upgrade the fw => https://support.microchip.com/s/article/Atmel-ICE-forced-firmware-update

Now both debuggers are working

Updated by Thomas Joseph 3 months ago Actions
Copy link
 #3

  • Subject changed from Debugger not detecting to Atmel ICE Debugger not detecting

Updated by Thomas Joseph 3 months ago Actions
Copy link
 #4

All three debuggers (s/n 400, 611, 426) and in good condition now

Updated by Thomas Joseph 3 months ago Actions
Copy link
 #5

  • Description updated (diff)

Updated by Thomas Joseph 3 months ago Actions
Copy link
 #6

  • Priority changed from Normal to Urgent

Updated by Sunder Venugopal about 2 months ago Actions
Copy link
 #7

  • Status changed from Resolved to Closed
Actions
Copy link

Also available in: PDF Atom