Task #2930
openTask #3004: Testing
Task #2928: Testing of PLCIO Stacked boards with CTB platform
Test PLCIO with CTB application
Added by Thomas Joseph 2 months ago. Updated about 2 months ago.
100%
TJ Updated by Thomas Joseph 2 months ago Actions #1
- Subject changed from Test PLCIO with eVidya application to Test PLCIO with CTB application
VS Updated by VenuMadhav S 2 months ago Actions #5
SD Updated by Sumanth D about 2 months ago Actions #8
- % Done changed from 40 to 50
Tested PLCIOV1P0 with CTB binaries.
AI, DI, and DO - 8 channels were working when we run separately.
But when all the AI, DI, DO run simultaneously AI is not generating. I am working on that
TJ Updated by Thomas Joseph about 2 months ago · Edited Actions #9
V1P0 Board Status
Many rework, not traceable
Tested with individual binary(with separate hardware changes) for AI, DI , DO - Working as expected. With common hardware, MISO amplitude got reduced
V1P1 assembled with host interface connector and isolator ( made config as #1 )
w/o any rework, AI, DI, DO got expected results
Observation in terminal log - In DO testing, MISO MSB was 0 in terminal log ( instead of expected 1), but DO output got correct
In CTB, menu driven code is not functional. hence DO is tested by hardcoding the values and the generating the binary
@Resmi K.V : Please put following in an excel sheet, upload in onedrive and give link in redmine.
Test setup, input , output (relevant details formatted and parsed ), observations, summary
upload unformatted logfile also in onedrive
Onedrive folder=> https://elpisit-my.sharepoint.com/:f:/g/personal/satish_sl_elpisitsolutions_com/IgArIylhefkfRZkUE5lGVwNcAREsLwpwwAUD7-wnyM3EtvQ?e=K4OwWb
TJ Updated by Thomas Joseph about 2 months ago Actions #10
- Assignee changed from Sumanth D to Bhumika R
TJ Updated by Thomas Joseph about 2 months ago Actions #11
Prakash on leave, assigned to Bhumika
TJ Updated by Thomas Joseph about 2 months ago Actions #12
Moving to Yoganand as Bhumika is on leave
TJ Updated by Thomas Joseph about 2 months ago · Edited Actions #13
- Assignee changed from Bhumika R to Yoganand D
PLCIO#1 - Host controller interface - Tested AI-8Ch, DI-8Ch, DO-8Ch
Issue - Observation : Observation in terminal log - In DO testing, MISO MSB was 0 in terminal log ( instead of expected 1), but DO output got correct
Tested AI and DI with Binary-1, DO with Binary-2
PLCIO#2 - no Host Interface, no AI, need to stack on #1
Hardware is ready with Daisy chaining of DI and DO
What is the plan for stacked PLCIO (8AI, 16DI, 16DO(source)) ?
Test Setup for DO Sinking atleast 100mA (Relay + LED board buy from Robu)
Test Setup for 8AI, 16DI available
DO- Binary-3 (update of Binary-2)
16DI and 8AI - Binary-4 (update of Binary-1)
@Yoganand D : Update source and binary in proj. folder and update link here, (File naming format " mDAQ2-3_CTB_Datalogger_V3.4" )
YD Updated by Yoganand D about 2 months ago Actions #14
- % Done changed from 50 to 90
I supported testing the PLCIO hardware for 8 Channel AI, 16 channel DI and 16 channel DO.
Modified code to work in iterative to test one module after another.
1. Completed 16 Channel DI testing.
2. Completed 16 Channal DO testing.
3. Completed 4 channel AI current Input Testing.
I have pushed the code, binary and the logs to my drive and have attached the link to the drive. Please find the attachment below:
OneDrive Link: https://elpisit-my.sharepoint.com/:f:/g/personal/yoganand_d_elpisitsolutions_com/IgDZ6LAJRkDpRLioY8XPKKeJAdcdd4GEgo4LTl1y1XoGzVw?e=IwdDUz
TJ Updated by Thomas Joseph about 2 months ago Actions #15
Prakash M wrote in #note-2:
Updated CTB code:
CTB PCB TPP => https://elpisit-my.sharepoint.com/:x:/g/personal/satish_sl_elpisitsolutions_com/IQCV-vBSXkIkSKgORL-8Q2rfAYan2qXCAGP8Ne4ER6dgVCc?e=Cihm2o
mDAQ2-3 PCB TPP (QMS Folder)=> https://elpisit-my.sharepoint.com/:x:/g/personal/sudhakar_elpisit_onmicrosoft_com/IQAfWTLVuFDxQIaToFylURK3AddSY96Z3FbAdRSewOkYM8s?e=6beRMN
YD Updated by Yoganand D about 2 months ago Actions #16
- Status changed from In Progress to Resolved
- % Done changed from 90 to 100
Completed Testing for Analog Voltage Input readings.
I have attached the log file link below.