SAM E54 Platform » Chola Turbo

An error message appears " restart process"; after clicking “Yes,” the device restarts.

The USB Device Configuration Software, when the protocol is changed from RTU to TCP in the Modbus Config section and the Update button is clicked, the system displays a "No response received from the device" error message, and the configuration change is not applied.

1. No response popup in the USB tool occurs when the ack is not sent or even if ack didn't reach to the tool as per the time intervals maintained in the tool so some time time period has been increased in the USB tool application. Even if that message is popping up the packet will be updated.

2. I'm handing over this for testing to chetan.

After few changes in the usb tool a new version is relesed and given for testing below is the onedrive link of new tool

https://elpisit-my.sharepoint.com/:u:/g/personal/satish_sl_elpisitsolutions_com/IQA8JGyhi4hISb1nxp67DtPjAVQkrT01-J6n0UzQMk6euEk?e=icFoqf

Tested in the CORE; it is working as expected. Validation is required in the latest Chola version.