Kardib

*Started with basic application - built,flash and verifying the application
*Verified the BLuetooth pheripheral application
*The device can able to connect with the mobile app(NRF connect)
*Started sending the data to the bluetooth mobile app.

Tested the UART serial Print in the DA14695 Board
Tested and debugged:
1.That Prolific USB to Serial Convereter is not working with this uart connector settings,
2.For that we need to test with CP210 Universal Windows Driver we need to install
3.For CP210 driver System console is working fine
4.Able to run the example code given in the renesas site and verified.

Demo Example Link for DA14695 Board:
https://lpccs-docs.renesas.com/da1469x_starting_project/results.html
Link for DA14695 Board Demo examples and tools:
https://www.renesas.com/en/products/da14695?tab=documentation

Run through the code and connected the device with nRF bluetooth in mobile app
Verified the data,sampled ECG data was hardcoded and that is sending through the ble and export the log in the mobile app
Verified the UART output also
As we are not connected the electrodes nodes now,we verified the hardcoded sampled ECG data both in Bluethooth mobile app and Uart
Need to verify the data in Phython GUI same data should sampled on the Phython GUI.