SAMA5D4 Platform » VAS Product Release 2.0

Tomorrow(08/06/2026), @VenuMadhav S and @Surendra Naik will visit ISTRAC for installation. ISTRAC will make mounting provisions for sensor and panel and we will do cabling and setup computer system.

After this we will test the panel and sensors at the server room.

Tuesday, @Mohan Kashyap also will join with them , update the firmware and software (will get laptop permission for Tuesday to Thursday).
@VenuMadhav S : Please do the temperature calibration also.

After this , panel and sensor will be installed at the antenna tower and continue testing.

@Jiban Munda: Please release the application with sensor conversion ,by tomorrow.

@Jagatheswaran J :Please complete software testing tomorrow morning for Jiban Kumar Munda, Mohan Kashyap to fix any issues if observed.

@Venu Krishnamurthy : Sir, Kindly give suggestions

8/6/2026

Additional items delivered.
All materials recorded in store register
All items moved from Main building to antenna tower

10/06/2026

Activities done

1. Temperature calibration in the device done with standard resistors and config file generated => https://elpisit.sharepoint.com/:f:/s/EmbeddedFiles/IgC4g3wYu8VbRITv-nd9ZH8DAff_B-NmJniFNkoEI3FhhlA?e=2MZNNU
2. PC setup in server room . (Driver was not installed, HDMI cable was needed)
3. Panel installed at Antenna tower, power supply panel in bottom room and device panel in Gearbox room
4. Tri-axial sensors installed with correct alignment
5. Due to constraints like space, round surface, it was very tedious to drill thread hole on gear box, but the ISTRAC experts managed
6. Power cable and LAN cable routed to the server

ToDo 11/06/2026

1. Drilling of temperature sensor thread-hole
2. Fixing temperature sensor
3. System power on and testing
4. Demonstration and Training
5. Collect data for analysis

11/06/2024
Installed temperature sensor
Completed demo to Mr. Vinod

For more detailed demo and explanation, ISTRAC requested training for one day=> Friday

On 22/06/2026 @VenuMadhav S and @Surendra Naik Visit:

1. I have given training about previous data loading and analyse.
2. Temperature transmitter's calibrated(Now it is showing correct value 31 degree and 34 degree).
3. Taken the log files for our analysis purpose.

Additional requirements:

1. ISTRAC wants visual alarm along with the beep alarm.
2. MS office licensed version.

Issues observed:

1. Only one device(91-Device1) data rendering in the application, another device data was not rendering in application even though device was ON condition and LAN connected(After that performed the Power reset and application restarted).
2. Application data is not logging properly.
3. Log files not created for each day.
4. Communication b/w device and application
5. 5008 error